BOS LE300 Lithium Expansion Battery, 2-Block

BOS LE300 Lithium Expansion Battery, 2-Block

BOS |1971301
GTIN: 4050269073983

JTL\Catalog\Product\Artikel Object ( [kArtikel] => 676 [kHersteller] => 30 [kLieferstatus] => 1 [kSteuerklasse] => 1 [kEinheit] => 0 [kVersandklasse] => 5 [kStueckliste] => 0 [kMassEinheit] => 0 [kGrundpreisEinheit] => 0 [kWarengruppe] => 0 [nLiefertageWennAusverkauft] => 3 [nAutomatischeLiefertageberechnung] => 1 [nBearbeitungszeit] => 0 [fLagerbestand] => 15 [nNichtLieferbar] => 0 [fMindestbestellmenge] => 0 [fPackeinheit] => 1 [fAbnahmeintervall] => 0 [fGewicht] => 6.9 [fUVP] => 0 [fUVPBrutto] => 0 [fVPEWert] => 0 [fZulauf] => 0 [fMassMenge] => 0 [fGrundpreisMenge] => 0 [fBreite] => 0 [fHoehe] => 0 [fLaenge] => 0 [cName] => BOS LE300 Lithium Expansion Battery, 2-Block [cSeo] => BOS-LE300-Lithium-Expansion-Battery-2-Block [cBeschreibung] =>

Shipping as a dangerous goods for EUR 19 within Germany. For the abroad, please send us an inquiry at mail@frenchman-energy.eu.

The LE300 Smart Battery System is a lithium expansion to increase the capacity and performance of the lead battery, as well as the efficiency and service life of the overall system.

The lithium expansion battery takes over most charging cycles while the lead battery works as a cheap backup storage. The lead battery is loaded with a higher priority, with the lithium battery taking over the surplus energy. When unloading, the lithium battery is primarily unloaded. As a result, the lifespan of the lead battery is significantly extended. The LE300 recognizes the voltage of the lead battery and automatically begins to support the lead battery with a maximum current thickness of 12.5 A. Larger loads are supplied in parallel by the lead battery and the lithium battery, which contains both batteries with less electricity.

All advantages at a glance

Plug & Play> Easy Connection of two cables
Flexible adaptation of the capacity by simply putting together individual modules.
Use of the existing lead loader possible.
Performance optimization of the battery system by loading priority of the lead battery and preferred unloading of the lithium battery
The performance of the lithium battery and the cost advantage of the lead battery are combined.
Slim and light design with variable fastening options.
Integrated heating system.

4 different variants available:
Lithium battery LE300 individual module
Lithium battery LE300 2 Series Block
Lithium battery LE300 4er block
Lithium battery LE300 6 Block

Technical specifications

System voltage	12 VDC
Nominal voltage	12.8 VDC
System voltage range	11 - 15 VDC
Number of used batteries in the LE300	IFPR/26/65 [8P/4S] E/-20NA/95 LIFEPO4 rechargeable batteries
Nominal lithium capacity	25.6 Ah/328 Wh
Usable lithium capacity	90 % (23 Ah/295 Wh)
Cycles number at room temperature	> 2000 full cycles
Recommended lead capacity per LE300 (not included)	70 - 125 AH @ 12 VDC
Recommended lithium/lead capacity ratio (net)	1/3 in Solarheim systems. Values vary depending on the required autonomy and application.
Continuous charging and discharge current	Max. 12.5 A between 5 and 40 ° C, at high and low temperature the electricity is limited.
Battery efficiency	>90 %
connections	RAST 5/MINI modules 4 PIN/ communication interface/ external display
Recommended cable diameter	1.5 - 4 mm²
Operating temperature (operation & storage)	-20 -50 ° C operating temperature with maximum battery life at 15 - 25 ° C. Storage temperature 10 - 30 ° C.
Over- and under temperature protection, heating, charge & discharge	In the lithium battery, the temperature sensor prevents the charging below -5 ° C or above 55 ° C cell temperature. Charge begins as soon as the cell temp. is higher than -5 ° C. The device has an integrated heating system that is activated between - 20 ° C and 10 ° C cell temperature. Discharge is possible between -10 ° C and 60 ° C cell temperature. For a higher battery life, the system runs below -10 ° C in pure bleim mode at a cell temperature.
Battery management BMS	Battery management including balancer
Protective functions	Overcurrent, overvoltage, short circuits, deep discharge, protection against false polarity.
Operating mode/compatible external batteries	Each 12 V lead battery and lead loader
Max. Parallel circuits of LE300S	As standard, a maximum of 24 LE300s can be connected in parallel. Parallel circuit> 24 St. is possible after consultation with the BOS dealer.
Certification & additional tests	CE, E1, Un38.3 Rüttel extent test, vibration test, mechanical shock test, temperature changing time run

Note: Always pay attention to the permissible max. System voltage when switching.

Selection of the different variants:
Lithium battery LE300 single module: 12V; 25.6 AH / 328 Wh, 3.4 kg - Art. 1971300
Lithium battery LE300 2 Series: 12V; 51.2 AH / 656 Wh, 6.9 kg - Art. 1971301
Lithium battery LE300 4er block: 12V; 102.4 AH / 1.31 kWh, 13.7 kg - Art. No. 1971302
Lithium battery LE300 6 Block: 12V; 153.6 AH / 1.97 kWh, 20.5 kg - Art. No. 1971303

LE300 assembly set Expansion of 2 -series modules to 4 or 6 modules.

This assembly set is not possible to expand individual modules to 4 or 6 Series.

Contents:

- Threaded rods for 4 module 221mm length (4 pieces)

- Thread rods for 6 -seater module 340mm length (4 pieces)

- Public nuts (2 pieces)

- Communication cable (2 pieces)

- cable ties (6 pieces)

%s

%s

%s

%s

%s

%s

Package PICO One in black

The PICO one package is the perfect battery and tank monitoring solution for smaller boats, campervans, buses and caravans with a service battery bank with up to 300 A at 12 V, 24 V, 48 V, 60 V and 72 V, one or two engine/standby battery banks and up to 2 tanks.

1x PICO one display unit
1x SC303 300 A shunt

SC303 is an innovative combination of shunt and tank level module.

The SC303 active combination shunt ensures precise monitoring of the battery voltage in systems with 12 V, 24 V, 48 V, 60 V and 72 V, the battery temperature and continuous currents of up to 300 A (peak 400 A). It is suitable for a maximum power of 3600 W at 12 V or 7200 W at 24 V. It has an additional battery voltage input (2 in total).

The measuring shunt has 2 resistor inputs for monitoring the tank level or temperature and an additional JST socket for the temperature sensor with JST connection. In addition, the SC303 module can also be used to monitor the power consumption of large consumers such as inverters, bow and stern thrusters and anchor winches and the power generated by generators such as shore power chargers, solar modules, water and wind power generators.

The innovative protected architecture of the SC303 enables connection to either the negative side (up to 72 V) or the positive side (up to 24 V).

Suitable tank sensors: Basically all resistance-based level indicators such as:

Wema sensor for water and fuel S3
Schaudt tank sensor (an adapter cable may be required)

All monitoring functions of the PICO One package:

1x battery bank with Real-Time Battery Health™ (monitoring of amperage, voltage and temperature)
2x battery voltage only
2x tank levels or temperatures

[cAnmerkung] => [cArtNr] => PK23-1-B [cURL] => Simarine-Pico-One-package-anodized-aluminium-black [cURLFull] => https://dev.frenchman-energy.eu/Simarine-Pico-One-package-anodized-aluminium-black [cVPE] => N [cVPEEinheit] => [cSuchbegriffe] => [cTeilbar] => N [cBarcode] => 4050269079800 [cLagerBeachten] => Y [cLagerKleinerNull] => N [cLagerVariation] => N [cKurzBeschreibung] =>

Batterie Monitor PICOone integr. Barometer, Anzeige von max.: 1 Batteriebank und max. 2 Anzeigen für Tanks, Spannungen oder Temperaturen.

%s

%s

%s

%s

%s

%s

567,18 €

incl. 0% VAT , Shipping costs for orders according to (DE) §12 para. 3 UStG

Choose tax zone / country of delivery

0% VAT for photovoltaics (Section 12 (3) UStG). For further information, please see und here

Available immediately
Shipping in 1-3 business days (DE - int. shipments may differ)

Due to exceptionally high demand, we are currently experiencing shipping delays. We apologize for any inconvenience.

Ordered in Germany. Delivered to Switzerland.

Order from any online shop in Germany and receive your goods at your doorstep in Switzerland in just 2–3 days.

Description

Shipping as a dangerous goods for EUR 19 within Germany. For the abroad, please send us an inquiry at mail@frenchman-energy.eu.

Plug & Play> Easy Connection of two cables
Flexible adaptation of the capacity by simply putting together individual modules.
Use of the existing lead loader possible.
Performance optimization of the battery system by loading priority of the lead battery and preferred unloading of the lithium battery
The performance of the lithium battery and the cost advantage of the lead battery are combined.
Slim and light design with variable fastening options.
Integrated heating system.

4 different variants available:
Lithium battery LE300 individual module
Lithium battery LE300 2 Series Block
Lithium battery LE300 4er block
Lithium battery LE300 6 Block

Technical specifications

System voltage	12 VDC
Nominal voltage	12.8 VDC
System voltage range	11 - 15 VDC
Number of used batteries in the LE300	IFPR/26/65 [8P/4S] E/-20NA/95 LIFEPO4 rechargeable batteries
Nominal lithium capacity	25.6 Ah/328 Wh
Usable lithium capacity	90 % (23 Ah/295 Wh)
Cycles number at room temperature	> 2000 full cycles
Recommended lead capacity per LE300 (not included)	70 - 125 AH @ 12 VDC
Recommended lithium/lead capacity ratio (net)	1/3 in Solarheim systems. Values vary depending on the required autonomy and application.
Continuous charging and discharge current	Max. 12.5 A between 5 and 40 ° C, at high and low temperature the electricity is limited.
Battery efficiency	>90 %
connections	RAST 5/MINI modules 4 PIN/ communication interface/ external display
Recommended cable diameter	1.5 - 4 mm²
Operating temperature (operation & storage)	-20 -50 ° C operating temperature with maximum battery life at 15 - 25 ° C. Storage temperature 10 - 30 ° C.
Over- and under temperature protection, heating, charge & discharge	In the lithium battery, the temperature sensor prevents the charging below -5 ° C or above 55 ° C cell temperature. Charge begins as soon as the cell temp. is higher than -5 ° C. The device has an integrated heating system that is activated between - 20 ° C and 10 ° C cell temperature. Discharge is possible between -10 ° C and 60 ° C cell temperature. For a higher battery life, the system runs below -10 ° C in pure bleim mode at a cell temperature.
Battery management BMS	Battery management including balancer
Protective functions	Overcurrent, overvoltage, short circuits, deep discharge, protection against false polarity.
Operating mode/compatible external batteries	Each 12 V lead battery and lead loader
Max. Parallel circuits of LE300S	As standard, a maximum of 24 LE300s can be connected in parallel. Parallel circuit> 24 St. is possible after consultation with the BOS dealer.
Certification & additional tests	CE, E1, Un38.3 Rüttel extent test, vibration test, mechanical shock test, temperature changing time run

Shipping weight:

6,90 kg

LE300 Mounting Kit Expansion to 4 or 6 Modules

29,95 € *

BOS LE300 Connection Cable 180mm

10,95 € *

Simarine Pico One package - anodized aluminium black

359,00 €

308,00 € *